Home / Makera Z1 Low-Profile Vise

MAKERA

Makera Z1 Low-Profile Vise

Name: Makera Z1 Low-Profile Vise
Brand: MAKERA
SKU: ADAABAB00101
Price: 99.00 USD
Availability: InStock

$99.00 USD

Shipping calculated at checkout.

Product variants

Description

*In stock and ships directly from the factory; for transit time, sea freight transport will take approximately 40–50 days.

[Total Tool Clearance] The ultra-low profile vise sits below the workpiece, eliminating spindle/bits collisions and "clamp anxiety." Secure from the side to leave 100% of the top surface open for edge-to-edge machining.

[Bed Protection & Through-Cuts] The Vise elevates your material for clean, full-depth through-cuts without scarring your CNC bed/countertop. Save money on replacement MDF and keep your Makera Z1 in "like-new" condition.

[Built for Precision & Power] Optimized specifically for work envelopes of Makera's desktop CNC's to maximize travel. Delivers best clamping force to prevent material shift, vibration, and broken bits during high-speed milling.

Note: Optimized exclusively for the Makera Z1 (not compatible with Carvera/Air).

Makera Z1 Low-Profile Vise

$99.00 USD

Shipping method

Let me start by saying I have only turned the machine on drew a circle with the software gave it some depth and test cut it without blowing up the machine
30 years ago I ran CNC machines
I remember nothing and never did any cad work truthfully I can’t believe how easy it was to do a test cut
By the way I had my chat GBT along for the ride that helped quite a bit
About the shipping
Payed for the machine
Nothing for a week
I sent you guys an email and asked about it
The email you sent back absolutely put me on the right track
Then all the shipping notices started hitting
When it left china
What ship it left on
What container it was in
How many days till US CUSTOMS in California
How long in customs
The day it left customs FedEx took over and noticed me almost every day until it gave me a specific day and a 4 hour window that it completely delivered on
Hopefully the machine will be as easy to figure out as the shipping was
When you are waiting a long time for something to show up and you have no idea about anything pertaining to it it totally sucks
When you practically know where it is every hour it is easy to wait
Thanks guys so far

Well Made Solid Vise

It is a well made solid vise. Construction is good enough for anything you would do on the Z1, comes with an extra set a jaws and all the mounting hardware. The installed jaws had quite a sharp metal burr on the top edge, needed to break the edge, be aware when you first open it if you grab it with bare hands. Makera should have removed the burr, but otherwise the vise is very well made.

Good vise

Works as intended it needs to have the pin holes relocated so it sit off the edge of table.

Great Value!

The only problem was the wired probe V2 was defective right out of the box.

Excellent product

Your shopping bag is empty.

Share

Makera Z1 Low-Profile Vise

Customer Reviews